How to Reset (Reboot / Power Cycle) your Nano-PC device

This guide shows how to Reset (power cycle) your Nano-PC device.  These instructions will work for both Nano-PC2 or Nano-PC3 devices.

Topics Covered

Important Note

Nano-PC devices will automatically run a daily Reboot at roughly 3am device time, if powered on.

Nano-PC powered by your TV USB port

  1. Turn off the TV and wait 5 seconds
    1. Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)

       

  2. Turn on the TV 
    1. Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)


The following will appear if you have successfully Reset (power cycled) your Nano-PC3 or Nano-PC2 device

 


Nano-PC powered by a Power Adapter (included with your package)

  1. Unplug one of the following
    1. MicroUSB cable from the Nano-PC

       

    2. MicroUSB Cable from the Power Adapter 

         

    3. Power Adapter from the Wall Outlet

       

  2. Plug back the MicroUSB Cable or Power Adapter

The following will appear if you have successfully Reset (power cycled) your Nano-PC3 or Nano-PC2 device

 

Reboot your Nano-PC from OnePass (from the Master License)

This will only work if your Nano-PC device has an active Internet connection

Tutorial - Mirroring

  1. Navigate to your NexSigns Licenses
  2. Select the Primary Device by clicking on any blank space in the data row



  3. Click on Reboot on your desired Device



  4. Your Nano-PC will now Reboot

Reboot your Nano-PC from OnePass (from the Mirrored License List)

This will only work if your Nano-PC device has an active Internet connection

Tutorial - Mirroring

  1. Navigate to your NexSigns Licenses
  2. Select the desired Device by clicking on any blank space in the data row

    If the desired device is currently Mirrored, click on Show Mirrored Licenses to view the entire device list





  3. Click on Reboot Device

    The Reboot button will change to Cancel Reboot



  4. Your Nano-PC device will now Reboot

    The Reboot button will revert back to Reboot Device once the Nano-PC receives the command


Reboot your Nano-PC from the NexSigns Application

  1. Connect a USB mouse or a Wireless Keyboard Mouse Combo
    1. Wired Mouse (Good) - insert the USB adapter into the Nano-PC device (located on the bottom beside the Power Cable)

        

    2. Wireless Mouse (Better) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)

       

    3. Wireless Keyboard Mouse Combo (Best) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)

       

  2. Wait until the NexSigns App launches and press the Right Mouse Button to launch the NexSigns Engineer Menu

       

  3. Left Click on Reboot System

     
      

  4. Your Nano-PC will now Reboot

Applies to

Nano-PC3, Nano-PC2

Related tickets