How to Setup your TV Matrix / Video Wall Device

Owned by Kuusoft Support
Last updated: Feb 28, 2024 by James Yeoh
3 min read

The TV Matrix / Video Wall Device is a powerful piece of hardware that can be used in 2 ways

TV MatrixTV Video Wall
  • includes 4 HDMI Input and 4 HDMI Output ports
  • allows users to easily select which input is displayed on any output
  • Creates a 2 x 2 Video Wall
  • Allows users to create a large display using 4 TVs
  • Supports Landscape and Portrait

Topics Covered

Nano-PC3 Retail Box - Parts Included

  

TV Matrix / Video Wall Device Package - Parts Included

  

Required Parts - Not Included

Setup the TV Matrix / Video Wall Device (Video Wall)

  1. Insert and screw on the AC Power Adapter to the DC/12V port on the TV Matrix / Video Wall Device

     

  2. Insert the appropriate electrical plug to the other end of the AC Power Adapter

     

  3. Plug in the other end of the AC Power Adapter into an available Electrical Outlet (or Surge Protector)
  4. Press the Video Wall button on the front of the TV Matrix / Video Wall Device



  5. Select the Input Source by selecting either In 1, In 2, In 3, or In 4 on the front of the TV Matrix / Video Wall Device 



  6. Connect a HDMI Cable (not included) into Output1 on the back of the TV Matrix / Video Wall Device and connect the other end into an HDMI Input Port on TV #1

      

    1. repeat for Output2 on TV #2, Output3 on TV #3, and Output4 on TV #4,

Setup a new Nano-PC device

  1. Plug in the MicroUSB cable into the DC IN port at the bottom of your Nano-PC3

      

  2. Use the HDMI Extender (optional but recommended)

    The HDMI Extender is useful to prevent the Nano-PC from blocking additional HDMI Ports and helps with cable management.
    1. Plug in the Nano-PC into the HDMI Extender 

        

  3. Plug in the HDMI Extender (with the Nano-PC attached) into the previously selected HDMI Input Port (either Input 1, Input 2, Input 3, or Input 4)

     

  4. Power the Nano-PC Device with the included Power Adapter
    1. Plug in the Power Adapter into an available Electrical Outlet (or Surge Protector)
       

Turn on the TVs

  1. Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)

     

  2. Change the TV Input to the respective HDMI Port
  3. Repeat for each of the installed TVs

               

While designing Assets for a TV Video Wall, we recommend avoiding the bezels whenever possible for optimal results

 

Applies to

Nano-PC2, Nano-PC3

Related tickets