Configure Wi-Fi Settings on a Nano-PC (USB Mouse) - Settings Menu

Owned by James Yeoh
Last updated: Jan 27, 2023
3 min read

These steps will help users configure Wi-Fi Settings on both Nano-PC2 / Nano-PC3 devices using a USB Mouse.

Configuration requires any standard Wired USB Mouse, Wireless USB Mouse, or Wireless KB Mouse Combo (not included).

Here are additional options to configure your Wi-Fi Settings on your Nano-PC device, 

Configure Wi-Fi Settings on a Nano-PC (USB Mouse) - Engineer Menu
Configure Wi-Fi on a Nano-PC3 (requires a USB Flash Drive)
Configure Advanced Wi-Fi Settings on a Nano-PC

If required, view this article on how to Change the Android Language Setting on a Nano-PC

Configure Wi-Fi Settings on a Nano-PC device - Settings Menu

  1. Setup your Nano-PC - How to Setup your Nano-PC
  2. Connect a USB mouse or a Wireless Keyboard Mouse Combo
    1. Wired Mouse (Good) - insert the USB adapter into the Nano-PC device (located on the bottom beside the Power Cable)

        

    2. Wireless Mouse (Better) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)

       

    3. Wireless Keyboard Mouse Combo (Best) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)

       


  3. Scroll to the top of the screen, Left Click and Hold, then drag the menu bar down

     

  4. Left Click and Hold the status bar, then drag it downwards

     

  5. Click on the Settings Menu Bar to expand it



  6. Click on the Settings button



  7. Click on Wi-Fi



  8. Find the desired Wi-Fi Network and click on it

     

  9. Input the Wi-Fi Password and click on Connect.

    Note that the Wi-Fi Password are both case-sensitive and space-sensitive


     

  10. You have successfully Configured Wi-Fi Settings on a Nano-PC device from the Settings Menu   



  11. Reboot your Nano-PC device

    How to Reset (Reboot / Power Cycle) your Nano-PC device

  12. Remove the USB Mouse from your Nano-PC

  13. You are done!  When your Nano-PC device restarts, it will use your new Wi-Fi Settings

Applies to

Nano-PC2, Nano-PC3