How to Setup your Nano-PC (Wi-Fi)

There are 2 options to power your Nano-PC device.

	Powered by TV USB Port	Powered by Power Adapter (included)

	Powered by TV USB Port	Powered by Power Adapter (included)
Pros	Ability to Reboot the Nano-PC device from the TV Remote	Works with every Nano-PC device and TV
Cons	Requires a TV USB Port with a minimum of 1.0 AMP of power	Requires an available electrical outlet Reboot requires physically unplugging the device

Kuusoft recommends powering the Nano-PC3 with the included AC Power Adapter and MicroUSB Power Cable.

Topics Covered

Nano-PC3 Retail Box - Parts Included

Plug in the MicroUSB cable into the DC IN port at the bottom of your Nano-PC3
Use the HDMI Extender and Cornering Anchor (optional but recommended)
1. Bend the HDMI Extender to the desired angle and apply the Cornering Anchor to secure it in place
2. Plug in the Nano-PC into the HDMI Extender
Plug in the HDMI Extender (with the Nano-PC attached) into your TV's HDMI port (location of the HDMI port may vary depending on the TV model)
Power the Nano-PC Device (complete EITHER of the following)
1. Power the Nano-PC with the TV USB Port (recommended)
  1. Remove the USB Cable from the Power Adapter
  2. Plug in the USB Cable directly into the TV USB Port
2. Power the Nano-PC with the included Power Adapter
  1. Plug in the Power Adapter into an available Electrical Outlet (or Surge Protector)
Turn ON the TV
1. Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)
Change the TV Input to the installed HDMI Port
You are done!