These steps will help users configure advanced LAN settings on Nano-PC3 devices using a Wireless Keyboard Mouse Combo.

Configuration requires any standard Wireless Keyboard Mouse Combo and a Micro USB OTG Adapter (both not included).

This article is intended for Expert Users trying to accomplish any of the following Advanced Network Configurations

Proxy
Enterprise Networks
Certificates
Static IPs

If required, view this article on how to Change the Android Language Setting on a Nano-PC

Topics Covered

Configure Static IP LAN Settings on a Nano-PC3 device

Setup your Nano-PC - How to Setup your Nano-PC (LAN / Ethernet)
Connect a Wireless Keyboard Mouse Combo
1. insert the Micro USB OTG Adapter into the Micro USB Port of the Nano-PC3
2. insert the USB Dongle into the USB Port of the Micro USB OTG Adapter
Press on the Home button on the Wireless Keyboard
Click on the Kuusoft icon to expand the ribbon menu, then click on the Settings application
Click on the Network icon then click on the Ethernet option
Click on the Advanced Options, then click on IP settings
Click on Static
Enter the intended Static IP Settings for the USB / LAN Adapter and click on the Next Button
Example of Settings
1. IP Address - 192.168.234.56
2. Gateway - 192168.234.1
3. Network Prefix Length - 24
  
  Network Prefix Length represents the number of subnet bits - 24 = 255.255.255.0
4. DNS 1 - 192.168.234.1
5. DNS 2 - 8.8.8.8
The Static LAN IP Settings will be saved and you will be returned to the Ethernet Advanced options page

IP settings will still display as DHCP and will be updated to Static when you exit and re-enter the Ethernet Advanced options page
Press on the Home button on the Wireless Keyboard
Click on the NexSigns icon
You are done! NexSigns will launch using your your new Static IP LAN Settings

Kuusoft recommends Rebooting your Nano-PC3 device after updating Advanced LAN Settings

Related articles

Related tickets

Browser not supported