These steps will help users configure the Wi-Fi Settings on a Nano-PC3 device using a USB Flash Drive.

This article is intended for Expert Users trying to complete large-scale setting updates on multiple devices.

Configuration requires a USB Flash Drive (not included). Recommended settings for the USB Flash Drive:

Topics Covered

Configure the Setting File (setting.conf)

Download the setting.conf file (If the Kuusoft Support Team emailed you a pre-configured Setting File, skip to Step 3)

File
Open the setting.conf file with Notepad, NotePad++, TextEdit, or another Text Editor

Note that the Wi-Fi SSID and Password are both case-sensitive and space-sensitive
1. Replace WiFiNetworkName with your Wi-Fi Network Name
2. Replace WiFiPassword with your Wi-Fi Password
Save the configured setting.conf file onto the root of the USB Flash Drive

Apply the Setting File

Unplug the Power Cable from the DC-IN port of your Nano-PC3 (The Nano-PC3 can stay connected to your TV)
Insert the USB Flash Drive into your Nano-PC3 (located on the bottom of the device)
Plug in the Power Cable into the DC-IN port of your Nano-PC3
The Nano-PC3 will update the Wi-Fi Settings and will automatically reboot your device.
Wait until the Nano-PC3 is back online
Remove the USB Flash Drive from your Nano-PC3
You are done!

Nano-PC3