Configure Wi-Fi Settings on a Nano-PC (USB Mouse) - Engineer Menu
These steps will help users configure the Wi-Fi Settings on both Nano-PC2 / Nano-PC3 devices using a USB Mouse from the NexSigns Engineer Menu.
Configuration requires any standard Wired USB Mouse, Wireless USB Mouse, or Wireless KB Mouse Combo (not included).
Here are additional options to configure your Wi-Fi Settings on your Nano-PC device,
Configure Wi-Fi Settings on a Nano-PC (USB Mouse) - Settings Menu
Configure Wi-Fi on a Nano-PC3 (requires a USB Flash Drive)
Configure Advanced Wi-Fi Settings on a Nano-PC
If required, view this article on how to Change the Android Language Setting on a Nano-PC
For Nano-PC4 - Configure the Wi-Fi Settings on a Nano-PC4 (USB Mouse)
Configure Wi-Fi Settings on the Nano-PC device - Engineer Menu
Setup your Nano-PC - How to Setup your Nano-PC
Connect a USB mouse or a Wireless Keyboard Mouse Combo
Wired Mouse (Good) - insert the USB adapter into the Nano-PC device (located on the bottom beside the Power Cable)
Wireless Mouse (Better) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)
Wireless Keyboard Mouse Combo (Best) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)
Wait until the NexSigns App launches and press the Right Mouse Button to launch the NexSigns Engineer Menu
Left Click on the Text Box below Wi-Fi SSID. Use the On-Screen Keyboard or Wireless Keyboard Mouse Combo to enter your Wireless Name (SSID).
Left Click on the Text Box below Wi-Fi Password. Use the On-Screen Keyboard or Wireless Keyboard Mouse Combo to enter your Wireless Password.
Left Click on Save Wi-Fi Settings
Left Click on Reboot System
Your Nano-PC will now Reboot
Remove the USB Mouse or USB Dongle from your Nano-PC
You are done! When the Nano-PC device restarts, it will use the new Wi-Fi Settings
Applies to
Nano-PC2, Nano-PC3