Configure Wi-Fi Settings on a Nano-PC4 (USB Mouse) - Engineer Menu

Owned by James Yeoh
Last updated: Oct 31, 2024
3 min read

These steps will help users configure the Wi-Fi Settings on Nano-PC4 devices using a USB Mouse from the NexSigns Engineer Menu.

Configuration requires a USB-C Adapter (included) and any standard Wired USB Mouse, Wireless USB Mouse, or Wireless KB Mouse Combo (not included).

Configure Wi-Fi Settings on the Nano-PC4 device - Engineer Menu

  1. Setup your Nano-PC4 - How to Setup your Nano-PC4 (Wi-Fi)
  2. Connect a Wired Mouse, Wireless Mouse, or a Wireless Keyboard Mouse Combo
    1. Wired Mouse (Good) - insert the Wired Mouse into the included USB-C Adapter, then insert the USB-C Adapter into the Side USB-C Port of the Nano-PC4

           

    2. Wireless Mouse (Better) - insert the USB Dongle into the included USB-C Adapter, then insert the USB-C Adapter into the Side USB-C Port of the Nano-PC4

        

    3. Wireless Keyboard Mouse Combo (Best) - insert the USB Dongle into the included USB-C Adapter, then insert the USB-C Adapter into the Side USB-C Port of the Nano-PC4

        


  3. Wait until the NexSigns App launches and press the Right Mouse Button to launch the NexSigns Engineer Menu

       

  4. Left Click on the Text Box below Wi-Fi SSID.  Use the On-Screen Keyboard or Wireless Keyboard Mouse Combo to enter your Wireless Name (SSID).

    Note that the Wi-Fi SSID (Network Name) and Password are both case-sensitive and space-sensitive

     
      

  5. Left Click on the Text Box below Wi-Fi Password.  Use the On-Screen Keyboard or Wireless Keyboard Mouse Combo to enter your Wireless Password.

       

  6. Left Click on Save Wi-Fi Settings

      

  7. Left Click on Reboot System

           

  8. Your Nano-PC4 will now Reboot



  9. Remove the USB-C Adapter and USB Mouse / USB Dongle from your Nano-PC4
  10. You are done!  When the Nano-PC4 device restarts, it will use the new Wi-Fi Settings

Applies to

Nano-PC4