Configure the Wi-Fi Settings on a Nano-PC (USB Mouse)

These steps will help users configure the Wi-Fi Settings on both Nano-PC2 / Nano-PC3 devices using a USB Mouse.

Configuration requires any standard Wired USB Mouse or Wireless USB Mouse (not included).

Here are additional options to configure your Wi-Fi Settings on your Nano-PC device, 

Configure Wi-Fi on a Nano-PC2 (requires a MicroSD)
Configure Wi-Fi on a Nano-PC3 (requires a USB Flash Drive)

Configure the Wi-Fi Settings on the Nano-PC device

  1. Setup your Nano-PC - How to Setup your Nano-PC
  2. Connect a USB mouse (complete either of the following)
    1. Wired Mouse - insert the USB adapter into the Nano-PC device (located on the bottom beside the Power Cable)

        

    2. Wireless Mouse (USB Dongle) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)

       

  3. Press the Right Mouse Button to launch the NexSigns Engineer Menu



  4. Left Click on the Text Box below Wi-Fi SSID.  Use the On-Screen Keyboard to enter your Wireless Name (SSID).

    Note that the Wi-Fi SSID and Password are both case-sensitive and space-sensitive

     



  5. Left Click on the Text Box below Wi-Fi Password.  Use the On-Screen Keyboard to enter your Wireless Password.



  6. Left Click on Save Wi-Fi Settings



  7. Left Click on Reboot System



  8. Your Nano-PC will now Reboot



  9. Remove the USB Mouse from your Nano-PC
  10. You are done!  When your Nano-PC device restarts, it will use your new Wi-Fi Settings

Applies to

Nano-PC2, Nano-PC3