Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 18 Next »

The following are requirements and recommendations for Nano-PC2 or Nano-PC3 devices to function properly on a Wireless Network

Topics Covered

Hardware Information

Nano-PC2 supports 2.4 GHz Wireless Networks
Nano-PC3 supports both 2.4 & 5 GHz Wireless Networks

Wireless Network Requirements

Note that the Wireless SSID and Wireless Password are both case-sensitive and space-sensitive

  1. DHCP should be enabled
  2. Access to the standard HTTP (Port 80) / HTTPS (Port 443) ports
  3. Access to the NTP (UDP 123) port to pool.ntp.org

The Default Settings on most Wireless Routers should already include these settings.

Hidden Wireless Networks are compatible.
Open / Unsecured Wireless Networks are compatible but NOT recommended.

Recommended Wireless Network Settings

Kuusoft recommends connecting Nano-PC3 Devices to a dedicated 5 GHz Wireless Network.  This can be achieved by differentiating the Wireless SSID of both Wireless Bands.

Example of a Wireless Configuration

  • 2.4 GHz
    • SSID could be set to NexSigns
  • 5 GHz
    • SSID could be set to NexSigns5

Applies to

Nano-PC2, Nano-PC3


  • No labels