Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

A TV Transmission Device allows users to integrate Live Television or other Digital Media along with their NexSigns Digital Signage \

Topics Covered

Table of Contents
maxLevel2
include^(?:(?!Applies|Related).)*$\r?\n?
absoluteUrltrue
stylesquare

Setup Instructions

Nano-PC3 Retail Box - Parts Included

...

TV Transmission Device - Parts Included

  Image Removed Image Added   Image Removed

Setup the NexSigns Router

...



Setup the TV Transmission Device V2

  1. Connect the HDMI cable into the HDMI Input port on the TV Transmission Device 

     

  2. Plug in the other end of the HDMI cable into your HDTV source
  3. Connect a Network Cable into the Ethernet port on the TV Transmission device 

     

  4. Plug in the other end of the Network Cable into the NexSigns Existing Router in  in a Network Port labeled 1, 2, 3, or 4

     
     
  5. Connect the AC Power Adapter into the 12V/DC port on the TV Transmission device 

     

  6. Plug the other end of the AC Power Adapter into an Electrical Outlet (or Surge Protector)

...

  1. Plug in the MicroUSB cable into the DC IN port at the bottom of your Nano-PC3

      

  2. Use the HDMI Extender and Cornering Anchor (optional but recommended)

    Info
    The HDMI Extender and Cornering Anchor is useful to hide the Nano-PC behind the TV, prevents the Nano-PC from blocking the TV USB port, and helps with cable management.
    1. Bend the HDMI Extender to the desired angle and apply the Cornering Anchor to secure it in place

       

    2. Plug in the Nano-PC into the HDMI Extender 

       

  3. Plug in the USB LAN Adapter into the Nano-PC

     

  4. Plug in one end of the Network Cable (Not Included) into the USB LAN Adapter

     

  5. Plug in the other end of the Network Cable into (Not Included) into a network port on the NexSigns Router the Existing Router in a Network Port labeled 1, 2, 3, or 4



  6. Plug in the HDMI Extender (with the Nano-PC attached) into your TV's HDMI port (location of the HDMI port may vary depending on the TV model)

     

  7. Power the Nano-PC Device (complete EITHER of the following)
    1. Power the Nano-PC with the TV USB Port (recommended)
      1. Remove the USB Cable from the Power Adapter 

         

      2. Plug in the USB Cable directly into the TV USB Port

         

    2. Power the Nano-PC with the included Power Adapter
      1. Plug in the Power Adapter into an available Electrical Outlet (or Surge Protector)
         

...

  1. Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)

     

  2. Change the TV Input to the installed HDMI Port

Setup a Layout

  1. Create a Custom Code Channel
  2. Copy and Paste the following code into the Custom Kuusoft Markup Language (KML) Text Box and press Save

    Code Block
    tvstream,http://192.168.234.88:8080/0.ts

  3. Create a Layout
  4. Create a Container and connect it to the previously created Custom Code Channel
  5. Press Publish to view the TV Streaming Input

...

Info

There is typically a 5 second delay in the response time of the Live TV Stream.

To change channels, you will need to point and use the included remote at your Cable TV box (or other HD input device)

Printable Installation Instructions

Here is the TV Transmission Setup Instructions - V4

View file
nametv-transmission-setup-instructions-V4.pdf
height250

Applies to

Nano-PC2, Nano-PC3, TV Transmission V2

...

Filter by label (Content by label)
showLabelsfalse
max5
spacescom.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@957
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel in ( "nano-pc2" , "nano-pc3" , "nexsigns" ) and type = "page" and space = "KB"
labelsnano-pc2 nano-pc3 nexsigns

...


Page Properties
hiddentrue


Related issues


...