These steps will help users configure the Wi-Fi Settings on Nano-PC4 devices using a USB Mouse from the NexSigns Engineer Menu.
| Info |
|---|
Configuration requires a USB-C Adapter (included) and any standard Wired USB Mouse, Wireless USB Mouse, or Wireless KB Mouse Combo (not included). |
Configure Wi-Fi Settings on the Nano-PC4 device - Engineer Menu
- Setup your Nano-PC4 - How to Setup your Nano-PC4 (Wi-Fi)
- Connect a Wired Mouse, Wireless Mouse, or a Wireless Keyboard Mouse Combo
- Wired Mouse (Good) - insert the USB Cable the Wired Mouse into the included USB-C Adapter, then insert the USB-C Adapter into the Side USB-C Port of the Nano-PC4(located on the side)
- Wireless Mouse (Better) - insert the USB Dongle into the included USB-C Adapter, then insert the USB-C Adapter into the Side USB-C Port of the Nano-PC4 (located on the side)
- Wireless Keyboard Mouse Combo (Best) - insert the USB Dongle into the included USB-C Adapter, then insert the USB-C Adapter into the Side USB-C Port of the Nano-PC4 (located on the side)
- Wired Mouse (Good) - insert the USB Cable the Wired Mouse into the included USB-C Adapter, then insert the USB-C Adapter into the Side USB-C Port of the Nano-PC4(located on the side)
- Wait until the NexSigns App launches and press the Right Mouse Button to launch the NexSigns Engineer Menu
Left Click on the Text Box below Wi-Fi SSID. Use the On-Screen Keyboard or Wireless Keyboard Mouse Combo to enter your Wireless Name (SSID).
Warning Note that the Wi-Fi SSID (Network Name) and Password are both case-sensitive and space-sensitive
- Left Click on the Text Box below Wi-Fi Password. Use the On-Screen Keyboard or Wireless Keyboard Mouse Combo to enter your Wireless Password.
- Left Click on Save Wi-Fi Settings
- Left Click on Reboot System
- Your Nano-PC4 will now Reboot
- Remove the USB-C Adapter and USB Mouse / USB Dongle from your Nano-PC4
- You are done! When the Nano-PC4 device restarts, it will use the new Wi-Fi Settings
...