This guide shows how to Reset (power cycle) your Nano-PC device.  These instructions will work for both vary for Nano-PC4 vs Nano-PC2 or amd Nano-PC3 devices.

Topics Covered

Any Nano-PC powered by your TV USB port

1. Turn off the TV and wait 5 seconds
   1. Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)
      
       
      
      
2. Turn on the TV 
   1. Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)

...

  Image Removed Image Removed

...

Nano-PC4 powered by a Power Adapter (included with your package)

1. Unplug one of the following
   1. USB-C cable from the Nano-PC4
      
      Image Added Image Added
      
      
   2. USB-C Cable from the Power Adapter 
      
      Image Added Image Added
   3. Power Adapter from the Wall Outlet
      
      Image Added Image Added
      
      
2. Plug back the USB-C Cable or Power Adapter

Nano-PC3 or Nano-PC2 powered by a Power Adapter (included with your package)

...

1. Unplug one of the following
   1. MicroUSB cable from the Nano-PC
      
       
      
      
   2. MicroUSB Cable from the Power Adapter 
      
         
      
      
   3. Power Adapter from the Wall Outlet
      
       
      
      
2. Plug back the MicroUSB Cable or Power Adapter
   

...

Reboot

...

any Nano-PC from OnePass (from the Master License)

1. Navigate to your NexSigns Licenses
2. Select the Primary Device by clicking on any blank space in the data row
   
   
   
   
3. Click on Reboot on your desired Device
   
   
   
   
4. Your Nano-PC will now Reboot

Reboot

...

any Nano-PC from OnePass (from the Mirrored License List)

1. Navigate to your NexSigns Licenses
2. Click on Show Mirrored Licenses
   
   Image Added
   
   

3. Select the desired Device by clicking on any blank space in the data row
   

   info

   
   

   If the desired device is currently Mirrored, click on Show Mirrored Licenses to view the entire device list
   Image Removed

   
   

   
   
   

4. Click on Reboot Device
   
   

   Info
   The Reboot button will change to Cancel Reboot

   Image ModifiedImage Modified
   
   

5. Your Nano-PC device will now Reboot
   
   

   Info
   The Reboot button will revert back to Reboot Device once the Nano-PC receives the command

   Image ModifiedImage Modified
   

Reboot your Nano-PC4 from the NexSigns Application

1. Connect a USB mouse or a Wireless Keyboard Mouse Combo
   
   1. Wired Mouse (Good) - insert the Wired Mouse into the included USB-C Adapter, then insert the USB-C Adapter into the Side USB-C Port of the Nano-PC4
      
       Image Added Image Added Image Added Image Added Image Added
      
      
   2. Wireless Mouse (Better) - insert the USB Dongle into the included USB-C Adapter, then insert the USB-C Adapter into the Side USB-C Port of the Nano-PC4
      
      Image Added Image Added Image AddedImage Added Image Added
      
      
   3. Wireless Keyboard Mouse Combo (Best) - insert the USB Dongle into the included USB-C Adapter, then insert the USB-C Adapter into the Side USB-C Port of the Nano-PC4
      
      Image Added Image Added Image AddedImage Added Image Added
      
      
2. Wait until the NexSigns App launches and press the Right Mouse Button to launch the NexSigns Engineer Menu
   
   Image Added Image Added  Image Added
   
   
3. Left Click on Reboot System
   
   Image Added  Image Added Image Added
   
   
4. Your Nano-PC will now Reboot
   
   Image Added

Reboot your Nano-PC3 or Nano-PC2 from the NexSigns Application

1. Connect a USB mouse or a Wireless Keyboard Mouse Combo
   
   1. Wired Mouse (Good) - insert the USB adapter into the Nano-PC device (located on the bottom beside the Power Cable)
      
        
      
      
   2. Wireless Mouse (Better) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)
      
       
      
      
   3. Wireless Keyboard Mouse Combo (Best) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)
      
       
      
      
2. Wait until the NexSigns App launches and press the Right Mouse Button to launch the NexSigns Engineer Menu
   
      
   
   
3. Left Click on Reboot System
   
      
   
   
4. Your Nano-PC will now Reboot
   
   

Applies to

Nano-PC4, Nano-PC3, Nano-PC2

Related articles

...