There are 2 options to power your Nano-PC4 device.


Powered by TV USB PortPowered by Power Adapter (included)
Pros
  • Works with every Nano-PC4 device and TV
Cons
  • Requires a TV USB Port with a minimum of 1.0 AMP of power


Kuusoft recommends powering the Nano-PC4 with the TV USB Port when possible.  All standard Displays (TVs), sold by Kuusoft, support powering the Nano-PC4 devices by the TV USB Port.

Topics Covered

Nano-PC4 - Parts Included


Additional Accessories Required - Not Included / Sold Separately

 

Setup a new Nano-PC4 device

  1. Plug in the USB-C Power Cable into the USB-C port at the bottom of your Nano-PC4

      

  2. Plug in the USB-C LAN Adapter into the side of the Nano-PC4

    <images required>

  3. Plug in one end of the Network Cable into the USB-C LAN Adapter

    <images required>

  4. Plug in the other end of the Network Cable into a network port with an active internet connection







  5. Plug in the Nano-PC4 into your TV's HDMI port (location of the HDMI port may vary depending on the TV model)

    <updated images required>

  6. Power the Nano-PC4 Device (complete EITHER of the following)
    1. Power the Nano-PC4 with the TV USB Port (recommended)
      1. Plug in the USB Cable directly into the TV USB Port

           <updated images required>

    2. Power the Nano-PC4 with the included Power Adapter
      1. Plug in the USB Cable into the Power Adapter 

         

      2. Plug in the Power Adapter into an available Electrical Outlet (or Surge Protector)
         
         

  7. Turn ON the TV
    1. Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)

       

  8. Change the TV Input to the installed HDMI Port
  9. You are done!

Applies to

Nano-PC4

Related articles

Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.