This guide shows how to Reset (power cycle) your Nano-PC device.  These instructions will work for both Nano-PC2 or Nano-PC3 devices.

...

1. Navigate to your NexSigns Licenses
2. Select the Primary Device by clicking on any blank space in the data row
   
   
   
   
3. Click on Reboot on your desired Device
   Image Removed
   Image Added
   
   
4. Your Nano-PC will now Reboot

...

1. Navigate to your NexSigns Licenses

2. Select the desired Device by clicking on any blank space in the data row
   
   

   Info
   If the desired device is currently Mirrored, click on Show Mirrored Licenses to view the entire device list

   
   
   
   

3. Click on Reboot Device
   
   

   Info
   The Reboot button will change to Cancel Reboot

   Image ModifiedImage Modified
   
   

4. Your Nano-PC device will now Reboot
   
   

   Info
   The Reboot button will revert back to Reboot Device once the Nano-PC receives the command

   Image ModifiedImage Modified
   

Reboot your Nano-PC from the NexSigns Application

1. Connect a USB mouse or a Wireless Keyboard Mouse Combo
   
   1. Wired Mouse (Good) - insert the USB adapter into the Nano-PC device (located on the bottom beside the Power Cable)
      
       Image Modified Image Modified
      
      
   2. Wireless Mouse (Better) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)
      
      Image Modified Image Modified
      
      
   3. Wireless Keyboard Mouse Combo (Best) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)
      
      Image Modified Image Modified
      
      
2. Wait until the NexSigns App launches and press the Right Mouse Button to launch the NexSigns Engineer Menu
   
   Image Modified Image Modified  Image Modified
   
   
3. Left Click on Reboot System
   
   Image Modified  Image Modified Image Modified
   
   
4. Your Nano-PC will now Reboot
   
   Image Modified

Applies to

Nano-PC3, Nano-PC2

...