This guide shows how to Reset (power cycle) your Nano-PC device.  These instructions vary for Nano-PC4 vs Nano-PC2 amd Nano-PC3 devices.

...

1. Navigate to your NexSigns Licenses
2. Click on Show Mirrored Licenses
   
   Image Modified
   
   

3. Select the desired Device by clicking on any blank space in the data row
   
   

   
   
   

4. Click on Reboot Device
   
   

   Info
   The Reboot button will change to Cancel Reboot

   Image ModifiedImage Modified
   
   

5. Your Nano-PC device will now Reboot
   
   

   Info
   The Reboot button will revert back to Reboot Device once the Nano-PC receives the command

   Image ModifiedImage Modified
   

Reboot your Nano-PC4 from the NexSigns Application

1. Connect a USB mouse or a Wireless Keyboard Mouse Combo
   
   1. Wired Mouse (Good) - insert the USB adapter into the Nano-PC device (located on the bottom beside the Power Cable)
      
       Image Added Image Added
      
      
   2. Wireless Mouse (Better) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)
      
      Image Added Image Added
      
      
   3. Wireless Keyboard Mouse Combo (Best) - insert the USB Dongle into the Nano-PC device (located on the bottom beside the Power Cable)
      
      Image Added Image Added
      
      
2. Wait until the NexSigns App launches and press the Right Mouse Button to launch the NexSigns Engineer Menu
   
   Image Added Image Added  Image Added
   
   
3. Left Click on Reboot System
   
   Image Added  Image Added Image Added
   
   
4. Your Nano-PC will now Reboot
   
   Image Added

Reboot your Nano-PC3 or Nano-PC2 from the NexSigns Application

...