The following are requirements and recommendations for Nano-PC2, Nano-PC3, or Nano-PC4 devices to function properly on a Wireless Network
Topics Covered
Table of Contents maxLevel 2 include ^(?:(?!Applies|Related).)*$\r?\n? absoluteUrl true style square
Wireless Network Requirements
| Note |
|---|
Note that the Wireless SSID and Wireless Password are both case-sensitive and space-sensitive |
- DHCP should be enabled
- Access to the standard HTTP (Port 80) / HTTPS (Port 443) ports
- Access to the NTP (UDP 123) port to pool.ntp.org
| Info |
|---|
The Default Settings on most Wireless Routers should already include these settings. Hidden Wireless Networks are compatible. |
Wireless Network Recommended Settings
Kuusoft recommends connecting Nano-PC3 or Nano-PC4 devices to a dedicated 5 GHz Wireless Network. This can be achieved by differentiating the Wireless SSID of both Wireless Bands.
Example of a Wireless Configuration
- 2.4 GHz
- SSID could be set to NexSigns
- 5 GHz
- SSID could be set to NexSigns5
Hardware Information
Nano-PC2 supports 2.4 GHz Wireless Networks
Nano-PC3 and Nano-PC4 supports both 2.4 & 5 GHz Wireless Networks
| Info |
|---|
Nano-PC3 and Nano-PC4 supports Ethernet / Network Cables - Wired Network Requirements for NexSigns |
Applies to
Nano-PC2, Nano-PC3, Nano-PC4
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Page Properties | ||
|---|---|---|
| ||
|