This guide shows how to Reset (power cycle) your Nano-PC device. These instructions will work for both Nano-PC2 or Nano-PC3 devices.
Topics Covered
Table of Contents maxLevel 2 include ^(?:(?!Applies|Related).)*$\r?\n? absoluteUrl true style square
| Info | ||
|---|---|---|
| ||
| Nano-PC devices will automatically run a daily Reboot at roughly 3am device time, if powered on. |
Nano-PC powered by your TV USB port
- Turn off the TV and wait 5 seconds
- Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)
- Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)
- Turn on the TV
- Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)
- Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)
...
| Info |
|---|
The following will appear if you have successfully Reset (power cycled) your Nano-PC3 or Nano-PC2 device |
Nano-PC powered by a Power Adapter (included with your package)
- Unplug one of the following
- MicroUSB cable from the Nano-PC
- MicroUSB Cable from the Power Adapter
- Power Adapter from the Wall Outlet
- MicroUSB cable from the Nano-PC
- Plug back the MicroUSB Cable or Power Adapter
...
- Navigate to your NexSigns Licenses
- Select the Primary Device by clicking on any blank space in the data row
- Click on Reboot on your desired Device
- Your Nano-PC will now Reboot
Reboot your Nano-PC from OnePass (from the License List)
| Info |
|---|
This will only work if your Nano-PC device has an active Internet connection Tutorial - Mirroring |
- Navigate to your NexSigns Licenses
Select the desired Device by clicking on any blank space in the data row
Info If the desired device is currently Mirrored, click on Show Mirrored Licenses to view the entire device list 
Click on Reboot Device
Info The Reboot button will change to Cancel Reboot 
Your Nano-PC device will now Reboot
Info The Reboot button will revert back to Reboot Device once the Nano-PC receives the command 
Applies to
Nano-PC3, Nano-PC2
...