/
How to Setup your Nano-PC4 (Video Input - Wi-Fi - LAN)

How to Setup your Nano-PC4 (Video Input - Wi-Fi - LAN)

Dec 29, 2025

This tutorial will provide instructions on How to Setup a Nano-PC4 with a Video Input connection.

Kuusoft recommends powering the Nano-PC4 with the included AC Power Adapter and USB-C Power Cable. 

Topics Covered

Nano-PC4 - Parts Included

Additional Accessories Required - Not Included / Sold Separately

Optional Accessories Required for Wired Connection - Not Included / Sold Separately

Nano-PC4 supports MicroUSB or USB-C LAN Adapters with an ASIX chipset (Realtek is not supported) - contact Kuusoft to purchase compatible adapters or for recommendations

Setup a new Nano-PC4 device with Video Input - Wi-Fi

  1. Plug in the USB-C Power Cable into the USB-C port at the bottom of your Nano-PC4




  2. Plug in the USB-C Video Capture Card into the side USB-C Port of the Nano-PC4

     


  3. Plug in one end of the HDMI Cable into the HDMI input of the USB-C Video Capture Card

     



  4. Plug in the other end of the HDMI Cable into the Video Output source (such as a Cable Box)




  5. Plug in the Nano-PC4 into your TV's HDMI port (location of the HDMI port may vary depending on the TV model)


     




  6. Power the Nano-PC4 Device 

    1. Plug in the USB-C Power Cable into the AC Power Adapter 

       



    2. Plug in the AC Power Adapter into an available Electrical Outlet (or Surge Protector)
       

       




  7. Turn ON the TV

    1. Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)


       




  8. Change the TV Input to the installed HDMI Port

  9. You are done!

Setup a new Nano-PC4 device with Video Input - LAN 

  1. Plug in the USB-C Power Cable into the USB-C port at the bottom of your Nano-PC4

     

     



  2. Plug in the MicroUSB LAN Adapter into the MicroUSB Port of the Nano-PC4

     


  3. Plug in one end of the Network Cable into the MicroUSB LAN Adapter

     



  4. Plug in the other end of the Network Cable into a network port with an active internet connection




  5. Plug in the USB-C Video Capture Card into the side USB-C Port of the Nano-PC4

     



  6. Plug in one end of the HDMI Cable into the HDMI input of the USB-C Video Capture Card

     



  7. Plug in the other end of the HDMI Cable into the Video Output source (such as a Cable Box)




  8. Plug in the Nano-PC4 into your TV's HDMI port (location of the HDMI port may vary depending on the TV model)


     




  9. Power the Nano-PC4 Device 

    1. Plug in the USB-C Power Cable into the AC Power Adapter 

       



    2. Plug in the AC Power Adapter into an available Electrical Outlet (or Surge Protector)
       

       




  10. Turn ON the TV

    1. Use either the Remote or the physical Power Button the TV (Remote and Power Button will vary depending on the TV model)


       




  11. Change the TV Input to the installed HDMI Port

  12. You are done!